Return to the Renewable Energy Forum | Post a Follow-Up

 o
Durisol ICF or Liteblok?

Posted by daisyblue (My Page) on
Fri, Mar 22, 13 at 11:54

This is crossposted from the Building A Home Forum...
Does anyone have any experience with or thoughts about these products? We are trying to determine the best way to go for a healthy, breathable, non-toxic wall system.

See link to Durisol website below.

Liteblok website: http://www.crescoconcrete.com/Liteblok 38.htm

We've also considered hempcrete, but I think it is going to be too cost prohibitive. [Hempcrete info: http://www.hemp-technologies.com/page15/page16/page16.html]

Thanks!

Here is a link that might be useful: Durisol website


Follow-Up Postings:

 o
RE: Durisol ICF or Liteblok?

Hi Daisyblue, good job on your research. I think you are asking some important questions. I just left a comment on some of the major drawbacks of ICF in the below thread.

Its common for people to obsess over the exterior walls influence on Interior Air Quality IAQ but it actually has very little impact on the big picture. According to NIOSH, building materials account for only 4% on a home's Indoor air problems.

The best path to better Indoor Air Quality is providing mechanical ventilation or outdoor air introduction. ASHRAE 62.2 is what International Building Codes recognize and is currently the best ventilation standard in the country. I just wrote two fairly detailed blog entries on the subject but I cant post them here as GW considers it advertising. They are easy enough to find by searching my name and keywords if youre interested.

Here is a link that might be useful: Garden Web thread on


 o
RE: Durisol ICF or Liteblok?

Somehow, I overlooked your response earlier Brian. Thank you for taking the time to reply. I have bookmarked your blog to read more in depth after my little one goes to bed.

Thanks again for sharing your thoughts!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Renewable Energy Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here