Search for:       Help & Key

Search results for:  garage door opener

        There were 1198 matches.

Previous Page   |   Page:   1   ...   39   40   41   42   43   ...   60

801
 Craftsman 1/2HP 1999 Garage Opener stutters while closing
       • Posted by: amaryllis52 on Mon, Apr 16, 12 at 4:35
              • 1 follow-up, posted on Mon, Apr 16, 12 at 9:37
Hello pro's: I have a garage opener (specs below), when it's time to close the door, it will start closing then stop after going down only a few inches , I would push on the close button again, it will start closing again but will only go down
  Forum Message  -   Found at:   Garages/Workshops Forum

802
 Garage door opens half way
Door closes fine. Opens half way & stops. Pressing button repeatedly to make it inch down, then inch back up again - eventually gets it open. Then I noticed that the door has some latitude to
    -   Found at:   http://ths.gardenweb.com/forums/load/garages/msg121418205941.html

803
 Sears Garage door won't open
       • Posted by: jacknole24 on Wed, May 11, 11 at 17:02
              • 1 follow-up, posted on Thu, May 12, 11 at 9:37
Hello all. I have a Craftsman 1/2 HP Belt-driven garage door opener that was installed in 1998. It recently developed a problem where it only opens the garage door a couple of inches before stopping (although the motor continues to run for about a
  Forum Message  -   Found at:   Garages/Workshops Forum

804
 Lift-Master Garage Door Openers Not Operating
Hi - I have two garage doors, each equipped with a Lift-Master 1265 garage door opener. A while back, they both stopped working. When I hit the
    -   Found at:   http://ths.gardenweb.com/forums/load/garages/msg0116054112707.html

805
 Liftmaster Professional 1/2 HP Door Opener Stuck
       • Posted by: techdesigner on Tue, Mar 6, 07 at 16:01
              • 1 follow-up, last one posted on Tue, Mar 6, 07 at 18:16
I pressed the button to activate the Liftmaster Professional 1/2 HP garage Door Opener and it makes a click and starts the motor then stops. I thought the door was stuck so I unhooked the chain and tried the button again and the gear turns 1/8 inc
  Forum Message  -   Found at:   Garages/Workshops Forum

806
 Garage door question, LED blinks 5 times.
       • Posted by: marc_2007 on Fri, Dec 28, 07 at 15:57
              • 1 follow-up, last one posted on Fri, Dec 28, 07 at 17:15
I installed my new garage door opener, Craftman model# 139.18458D, about 1 month ago. It was working fine, then one day when I tried to open it with the remote, the motor continued to push the door downward and bent the metal bracket. I have since
  Forum Message  -   Found at:   Garages/Workshops Forum

807
 Craftsman/Genie garage door remote compatible?
       • Posted by: mhoner96 on Sat, Mar 13, 10 at 11:30
              • 1 follow-up, last one posted on Sun, Mar 14, 10 at 16:43
Hello, I moved into a new home and the previous owner has a sears craftsman garage door motor (139.53640SRT) but left me with a Genie garage door remote (GT90-1). Is there any way that the Genie garage door opener is compatible with the Sears Cra
  Forum Message  -   Found at:   Home Repair Forum

808
 Garage door problem
       • Posted by: gregpm on Tue, Jun 21, 11 at 9:11
              • 1 follow-up, posted on Tue, Jun 21, 11 at 10:05
I have a Craftsman 1/2 HP belt drive opener. Its about 7 yrs old. It will intermittantly close then reopen. It seems to travel too far causing it to open. When this happens the opener track bar will bow up considerably. I have checked the door b
  Forum Message  -   Found at:   Garages/Workshops Forum

809
 Need advice--this is what home inspector found
Talked to the agent and he said none of the things listed below are things that are asked to be corrected in
    -   Found at:   http://ths.gardenweb.com/forums/load/realestate/msg0410294524848.html

810
 Garage Door
       • Posted by: ktabe on Wed, Mar 18, 09 at 13:46
              • 1 follow-up, last one posted on Wed, Mar 18, 09 at 14:51
I have a Liftmaster 1\2 hp that is eratic.I was recently away for a week, and the first two tries on returning, the door closed, where it didn't before I left.I've checked the sensors,down and up adjustments,tightend everything in sight,spray lube
  Forum Message  -   Found at:   Garages/Workshops Forum

811
 Absorption of half the garage space.
       • Posted by: chester_grant on Tue, Jul 31, 07 at 23:57
              • 3 follow-ups, last one posted on Sat, Aug 4, 07 at 10:09
We have a single garage which is an integral part of the house. But as we need more space internally we are considering absorbing the back 10 feet of the garage and adding it to a small room - this would give us a much more useable 18x10' room.
  Forum Message  -   Found at:   Smaller Homes Forum

812
 Garage Door Remote Stopped Woorking
       • Posted by: Radar322 on Fri, Apr 20, 12 at 18:17
              • 1 follow-up, posted on Mon, Apr 23, 12 at 20:32
I read that another electrical appliance (any kind) can interfer with the remote control for your garage door opener. My remote when new would work 1/2 block away and then, all of a sudden, it would only work if I was standing directly in front o
  Forum Message  -   Found at:   Garages/Workshops Forum

813
 How to program remote Craftsman GD Opener Model 139.245610
       • Posted by: sunlake on Fri, Dec 14, 07 at 22:29
              • 12 follow-ups, last one posted on Thu, Apr 28, 11 at 15:27
I have got a second remote and would like to know how to program it without affecting the existing one. Thanks Follow-Up Postings: RE: How to program remote Craftsman GD Opener Model 139.245610 Posted by: Return to the Garages/
  Forum Message  -   Found at:   Garages/Workshops Forum

814
 Another Craftsman garage door problem
       • Posted by: donnyvwald on Tue, Nov 11, 08 at 17:41
              • 1 follow-up, last one posted on Tue, Nov 11, 08 at 18:47
I took it upon myself to put new batteries in my wife and my remote. I also reset the opener and set the frequency to open and close the door. Everything was working great until my neighbor came home and as she opened her garage door mine also wen
  Forum Message  -   Found at:   Garages/Workshops Forum

815
 Craftsman Keyless Entry #53876 & Garage Door Openers
       • Posted by: maryjo_maryjo on Wed, Aug 6, 08 at 11:37
              • 1 follow-up, last one posted on Wed, Aug 6, 08 at 17:57
We purchased a new Craftsman Garage Door Keyless Entry Pad since our old one died. When trying to program the keyless pad the garage door openers were interuppted so we reprogrammed the openers and now the keyless pad won't work. How do you get al
  Forum Message  -   Found at:   Garages/Workshops Forum

816
 GDO - gets hung up going up /down - snags
       • Posted by: bronxbill on Tue, Dec 27, 11 at 11:00
              • 3 follow-ups, last one posted on Thu, Nov 15, 12 at 16:00
12 year old craftsman 1/2 hp 139.53964.RT gets hung up /snags - tilted a little on one side (not all the time) could it be that new springs are needed or rollers to be replaced. Follow-Up Postings: Return to the Garages/Workshops F
  Forum Message  -   Found at:   Garages/Workshops Forum

817
 Craftsman 1/2 HP Opener Short remote range
       • Posted by: rbm442 on Sat, Dec 24, 11 at 16:12
              • 2 follow-ups, last one posted on Tue, Dec 27, 11 at 10:42
My garage door opener is a Craftsman 1/2 HP unit that I bought in 1990. It has worked fine for years. The problem I have is the range on the remote is very short. I put in fresh batteries and you have to stand right in front of the door for it
  Forum Message  -   Found at:   Garages/Workshops Forum

818
 Garage Door Wall Button Console - How to Open or Remove? (photos)
       • Posted by: love_the_yard on Mon, Jul 30, 12 at 19:56
              • 1 follow-up, posted on Tue, Jul 31, 12 at 10:37
I have an Overhead Door Python Chain Glide, Model OCG750 garage door opener that was installed in 1995. The wall button is working only intermittently. (The remotes work fine.) My problem is that I can't figure out how to open the wall button
  Forum Message  -   Found at:   Garages/Workshops Forum

819
 Garage door closes erratically
       • Posted by: lowellches on Sat, Oct 12, 13 at 15:28
              • 1 follow-up, posted on Tue, Dec 3, 13 at 23:48
I have 3 single garage doors with 3 Sears openers. Two openers close correctly. The third opener has periodically caused the door to hit too hard and reverse. I adjusted it per instructions in the manual but after a while it would happen ag
  Forum Message  -   Found at:   Garages/Workshops Forum

820
 GDO remote only works inside garage!
       • Posted by: ginmcd on Mon, May 31, 10 at 10:47
              • 2 follow-ups, last one posted on Mon, May 31, 10 at 12:40
I have a 2001 Chamberlain GDO and am having problems with the remote (I've tried changing the battery as well as just buying a new remote) & it's driving me insane! The remote will not work if I'm anywhere in front of the garage door (which is met
  Forum Message  -   Found at:   Garages/Workshops Forum

Next Page   |   Page:   1   ...   39   40   41   42   43   ...   60

Search for:       Help & Key

Run this search at:   GardenWeb