|
Mon, Dec 7, 09 at 9:06
| I have a Porter Cable model 333 5" orbital palm sander. I want to connect the little dust port to either my shop dust collection system or a shop vac. I have looked on line for an adapter for the small port, but have not found one to make the necessary connection. Any ideas?
Jeff |
Follow-Up Postings:
|
- Posted by mike_kaiser (My Page) on Mon, Dec 7, 09 at 9:27
| Jeff, You're looking for P-C dust collection kit #73333. It includes a hose that fits the sander, an adapter to get to an ordinary shop vacuum port, and a hood for their model #7335/7336 sander (although you really don't need that. Not sure if the hose and adapter are available separately. |
|
| Mike - thanks for the info. I have a P-C service center in town and will take this info to them. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.