|
Sun, Nov 2, 08 at 18:04
| For very light duty outdoor use, I need to edge glue some 3/4 treated lumber to get a width not stocked in local stores. It probably will be ACQ treated. If edge glued with urethane, such as Gorilla glue, is this likely to be satisfactory for permanent weather exposure for low mechanical stress application? |
Follow-Up Postings:
|
| I've used Gorilla glue on PT outdoor applications. After a year it seems to be holding up OK on my large gates. The frame of the gate is made of 2x6 PT w/ rails lap jointed to the stiles- plenty of surface area for gluing and screwing. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.