|
Tue, Nov 8, 11 at 13:46
| Anyone have experience and/or recommendations regarding a DIY ultra-violet light cured finishes?
We're installing a 63" long mahogany vanity top with a top mounted sink in a bathroom. For finish, I'd like to use a marine varnish like Epifanes. However, I recently read about UV cured finishes that cure in seconds instead of the weeks required for marine varnish. The article was for the commercial production audience and I haven't found much information on-line, just mfg. claims. TIA |
Follow-Up Postings:
|
| The fast curing UV finishes use light that is dangerous for human exposure. Not really a DIY thing. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.