Return to the Woodworking Forum | Post a Follow-Up

 o
Water rings on teak table?

Posted by badgergrrl (My Page) on
Mon, Oct 11, 10 at 15:05

I have a danish teak dining room table that has some water spots on it (some that were there when I got it). I have been faithful about oiling it regularly, however, apparently others have not been so faithful about using coasters. Grrrr.

What are my options for removing the rings?


Follow-Up Postings:

 o
RE: Water rings on teak table?

I use stain removal cloths and have never had a water stain that I cannot get out. I buy these 20 or 30 at a time and use them professionally. You can find a consumer version at Lowe's in the paint department.

They do leave a rather glossy sheen, so if your finish is flat, you might need to dull down your end result with steel wool and/or a spritz of flat lacquer aerosol.

They also can leave a bit of greasy residue from the rubbing oil in them. You can easily remove this with furniture polish or mineral spirits.

Other home remedies include smearing with Vaseline or mayonnaise, baby oil and cigarette ashes, proprietary products (often containing alcohol (methanol or ethanol)), and gently heating with a hair dryer. I have seen people recommend using a clothes iron -- this is extremely dangerous unless you know a lot about the finish and how much heat it can handle (read: experience).


 o
RE: Water rings on teak table?

Have you tried rubbing in toothpaste? That has always worked for me.


 o
RE: Water rings on teak table?

Do you use teak oil? Teak oil hardens and can be impossible to reamalgamate (soften). The ring is trapped moisture,and can sometimes be removed with a soft lint free cloth and an iron on a low to medium setting. Carefully iron the shirt over the water ring and keep checking to see if the ring is disappearing. It can be an effective method.

Good luck!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here