|
Tue, Oct 23, 07 at 11:46
| I have a Central Machinery wood lathe and I need the chuck so I can cut out ink pens. can you give me any information on what chuck I need to order and where to order it from.
Thank You J. Wayne |
Follow-Up Postings:
|
- Posted by poohbear2767 (My Page) on Tue, Oct 23, 07 at 22:07
| Since you have a Harbor Freight lathe I would think that a chuck from Harbor Freight would work. How well does your lathe work for you. Pooh Bear |
Here is a link that might be useful: 4 jaw chuck at Harbor Freight
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.