|
Mon, Oct 12, 09 at 11:41
| Looking for source for 1/8-1/4" thick ready-to-finish plywood for walls. Furniture grade. NOT typical pre-finished plywd. Want to apply like large tiles with sanded edges. Fasteners will show. Finish on job. Dry climate. Thanks, Tom. |
Follow-Up Postings:
|
- Posted by mike_kaiser (My Page) on Mon, Oct 12, 09 at 13:15
| Tom, Have you tried Google or your favorite search engine for a location near you. Shipping sheets of plywood might not be cheap. |
|
| You don't give a location, but in my area a chain called Windsor Plywood would be the supplier of choice, I think. Not sure you can get pre-sanded edges though. They have a website. There are a very few American stores and a lot of Canadian ones. KarinL |
Here is a link that might be useful: Windsor Plywood locations
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.