Return to the Woodworking Forum | Post a Follow-Up

 o
Crown Modeling with beams and other 'roughed in' items.

Posted by libbyh (My Page) on
Tue, Sep 2, 08 at 11:28

Our contractor did a great job of roughing in ducts, beams, etc in our new downstairs master bed and bath.

However - now what standard do we use for putting up the crown? Does it ONLY go against true ceiling and not along the duct that is 12" lower along an entire wall?
With a beam in the middle of the room - does is follow the beam or just stay against the ceiling? Nothing seems to look right - HELP!!!


Follow-Up Postings:

 o
RE: Crown Modeling with beams and other 'roughed in' items.

I'd put the crown only at the ceiling height around the parimeter.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here