|
Sun, Sep 5, 10 at 8:25
| We have a wood bed frame that has been squeaking for a few weeks now. It is located where the side rail intersects with the head board. Basically there are 2 screws on the side rail and a metal slot in the head board for them to slide into and down. I bought some Pb Blaster Dry Lube teflon spray from Home Depot (after getting a bunch of blank looks when asking about the best product for this) and the squeaking stopped...for one week. Can anyone suggest a more permanent solution?
Thanks E |
Follow-Up Postings:
|
- Posted by bobsmyuncle (My Page) on Sun, Sep 5, 10 at 21:14
| paraffin (candle wax) rubbed on bearing surfaces. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.