|
Fri, Jul 16, 10 at 14:45
| hello Forum, we just installed a wood frameless niche (h=30,w=27,d=12)in the kitchen and I'd like to put on the lower shelf my coffee grinder (and free the couter-top space). I was thinking about a pull out shelf (no edges) to be able to slide out the grinder fill up the top of the grinder, run it and push it back into place. There is power outlet in the niche. :)
The hardware should be on both sides and kind of hidden. Any suggestion? TX Milele |
Follow-Up Postings:
|
- Posted by someone2010 (My Page) on Wed, Jul 21, 10 at 21:21
| You can go on line to a site like Woodworkers Supply and they have all kinds of shelf hardware that would apply to your project. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.