Return to the Woodworking Forum | Post a Follow-Up

 o
Detailed trim estimate--quantities,etc

Posted by qdwag (My Page) on
Wed, Jun 9, 10 at 18:04

Install approximately 72 l.f. of wall-to-ceiling border trim in Master Bedroom constructed from WM47 9/16" x 4-5/8" crown over inverted WM376 11/16" x 2-1/4" base over inverted WM163ES 9/16" x 5-1/4" ogee baseboard.

Install WM97 1-1/16" x 3-1/2" casing along angle seams of vaulted ceiling and around flat ceiling perimeter at vault apex.

Install fourteen (14) ceiling box frames constructed from WM163 11/16" x 1-3/8" ogee base cap along vault of ceiling between angle seams.

This section is $1930.00

Install approximately 56 l.f. of wall-to-ceiling border trim in Sitting Room constructed from WM47 9/16" x 4-5/8" crown over inverted WM376 11/16" x 2-1/4" base over inverted WM163ES 9/16" x 5-1/4" ogee baseboard.

Install WM97 1-1/16" x 3-1/2" casing along angle seams of vaulted ceiling and around flat ceiling perimeter at vault apex.

Install twelve (12) ceiling box frames constructed from WM163 11/16" x 1-3/8" ogee base cap along vault of ceiling between angle seams.

This section is $1535.00

Install door jams and install WM99 11/16" x 3-1/2" colonial beaded edge casing to both sides of two (2) doorways in Master Bedroom.

Cost $440

Thoughts? this is a differnet estimate then the earlier post,but same work+-


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Woodworking Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.