Return to the Woodworking Forum | Post a Follow-Up

First time, help! Table top

Posted by Bgibs10 (My Page) on
Wed, Jun 26, 13 at 15:44

Hi, I've been lurking a lot, and now I'd like some help! I purchased this table on CL and I want to refinish. The pedastal and bottom of the table I'm going to paint with chalk paint and wax, the top is in good shape, just old and worn. I don't really want to stain it, so I was looking for an oil that either naturally tinted the wood or that had a tint to it. The reason I don't want to stain is because I'm not confident in my ability to not make it streaky! Although, I hear wood conditioner eliminates that? My final question is what should I protect the top with? I plan to paint, antique/distress the pedastal and chairs, and keep the top relatively simple.

Follow-Up Postings:

RE: First time, help! Table top

First, stain does not work if there is a finish on the wood---which is present on that table.

The easiest and most durable finish for the top will be non poly varnish. The easiest way to apply that is to use a wipe on mix. It takes six or more coats of wipe on varnish to equal three coats of brushed or sprayed on varnish, but for a DIYer, wiping is almost foolproof.

RE: First time, help! Table top

Likewise, you shouldn't really put an oil finish over an film-forming finish. The most likely finish on there now is lacquer. That said, there are many finishes that on the label would appear to be "oil" such as tung oil finish, antique oil finish, etc., that are really wiping varnishes.

You should also do a thorough cleaning to get rid of accumulated grease, body oil, foods, and general soiling before attempting any finish over the top.

Another complication is that if there is silicone oil from Pledge on there. That can cause many finishes to fish eye (crater).

RE: First time, help! Table top

Thanks! After cleaning, should I strip it then? Or just sand really well? Or just paint it with the chalk paint? Lol.

The seller said it was at least 50 years old. It belonged to her patents. Just in case that's any indication of what the current finish could be.

RE: First time, help! Table top

If you want to change the color, it's probably best to do the stripping. (There are other ways, but they're not particularly DIY level). Don't just "sand off the old finish." Worst case, you zip through the veneer to the substrate, best case, you don't completely remove the finish or remove it evenly and your stain will be uneven.

The discussion above led me to believe you just wanted to top coat. If you want something different, then yes, strip.

Lacquer became used after WWI and displace shellac for the next 20 years. After WWII, almost all finishes are lacquer up until recently when there are a few other things coming in.

RE: First time, help! Table top

Thanks so much Bobsmyuncle! Yes, I really just wanted a top coat. One, particularly that might bring out the richness of the wood, but a top coat nonetheless. What do I use to get the old stuff off then?

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here