|
Tue, Jun 19, 07 at 14:47
| I have a Central Machinery belt-disc sander Model #1282. I need a new M-21 V-belt, but have been unable to find a supplier and don't find any in my town. Any suggestions? |
Follow-Up Postings:
|
| If it's a 1/2" or 3/8" belt, try taking the old belt to an auto parts store. They should be able to measure it and come up with an equivalent auto v-belt. |
|
| Thank you Randy. My husband was able to find one at an ACE Hardware in a nearby town. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.