Return to the Woodworking Forum | Post a Follow-Up

dried out wood finish, please help

Posted by holly-kay (My Page) on
Tue, Jun 11, 13 at 8:31

I have a lovely antique breakfast table that belonged to my mother. It has a fluted pie crust type edge and a beautiful center carving. The finish on it is in very bad shape with numerous water rings etc where my DGS put drinks on the table. The wood is also extremely dried out.

I have been using a lemon oil on it weekly and that helps to make it look a bit better but still not great. I know that refinishing it could affect it's value but I don't plan on ever selling it.

What would be the best way to clean it and also protect it? I would so very much appreciate the expert help from my fellow GW members. TIA.

Follow-Up Postings:

RE: dried out wood finish, please help

The first step is to identify what finish is on the table now.

It may be shellac and easily restored by applying some new layers.

RE: dried out wood finish, please help

How do I tell? It almost seems like it is just stained because the sheen is only present after I oil it.

This came from an antique shop in the Washington DC area and was purchased about 40 years ago. It was deemed an antique even then. I believe the wood may be walnut.

I am attaching a pic of it.

RE: dried out wood finish, please help

Use this preparation to clean, and restore wood furniture.

In the top of an old double boiler or in a two-quart can, add:
3 tablespoons boiled linseed oil (buy it as such)
2 tablespoons turpentine
1 quart hot water
Place over hot water until the moisture is as warm as a gloved hand can stand. For best
results, provide a means for keeping the solution hot while it is being used.
Dip in a soft, clean cloth into the solution. Lift it out and squeeze until it does not drip.
Go over an area no larger than about 1 by 2 feet, redipping the cloth in the hot solution,
squeezing it until it does not drip, and washing until the area is clean. Follow immediately with a
clean, dry, absorbent cloth until all oil is removed. Boiled linseed oil allowed to remain on the
wood will become tacky. Continue until the entire piece has been cleaned.
The solution not only cleans woods, it also protects the finish. The hot water and
turpentine removes the soil and the boiled linseed oil lubricates the wood, thus preventing
hairline checks in the finish. It also makes checks already in the wood less noticeable.

RE: dried out wood finish, please help

Thank you Sloyd. I will see if I can get my FIL to help me.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here