|
Tue, May 19, 09 at 10:39
| i have an hardwood threashold at my back door. (6" x 4', oak, stained). it gets lots of afternoon sun, and rain. what type of protection should i put on it? it is 2 yrs old, i originally used an exterior poly, but that seems to be deteriorating and the wood is getting water on it. should i use a different poly, or a marine varnish, or what?
also, can i just sand off the original poly, restain the wood, and put the new finish on? |
Follow-Up Postings:
|
| Storm door or plan on refinishing every couple years. Spar varnish might hold up a little better, but it often needs maintenance every year or so. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.