Return to the Woodworking Forum | Post a Follow-Up

 o
Drawer dividers

Posted by aliris19 (My Page) on
Sat, Apr 5, 14 at 16:58

Hi All! I have a question about constructing a cabinet with undermount Blum soft close hardware ... It seems to attach on the sides of the box, so is it necessary to place a wooden divider between drawers in a drawer stack, or can you just attach the drawer dividers to the sides of the box OK? Is there a stability issue if you do not include the intervening separators?

TIA!!!!


Follow-Up Postings:

 o
RE: Drawer dividers

Hi TIA, I'm not a cabinet maker but I am handy. I took a look at our custom cabinets. They use side mounted drawers, not under-mounts; but they are essentially the same concept. Each drawer stack is one box without any dividers. I had to look up your hardware and almost immediately found a nice installation video. It also shows a box without dividers (eventually). Each of our custom cabinet units was made from a complete box butted to the next box. Therefore most 'sides' are actually almost 1.5 inches thick and therefore massively stable.

Here is a link that might be useful: Blum install


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here