|
Mon, Apr 18, 11 at 12:37
| I will be making a folding luggage stand like shown in the link below.
http://shop.tuesdaymorning.com/dsp_productDetail.asp?ssid=1&pid=8998 What hardware should I use for the swivel joint in the legs? I guess that a screw/lag bolt through the legs and a washer between the legs would work? The washer would prevent the legs from rubbing when folded. Is there a more decorative solution? A brass rod and washer might look nicer.
|
Follow-Up Postings:
|
| the roto hinge would work. http://www.leevalley.com/en/hardware/page.aspx?p=40237&cat=3,41241,412 65 |
|
| That's just what I was looking for. I didn't know such a thing existed. Thanks sloyd. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.