|
Sun, Feb 13, 11 at 20:58
| Hello,
My husband will be building some shelving in a storage area. He found melamine panels at HD with holes predrilled for shelf pegs. However we would like to make 24" wide shelves. Does anyone where we could find this product int he desired width? |
Follow-Up Postings:
|
- Posted by mike_kaiser (My Page) on Tue, Feb 15, 11 at 8:20
| Can't say I've seen it but can't say I've looked for it either. The product exists but if you can't find it locally, the shipping is probably going to be cost prohibitive. It's really not that hard to drill your own holes. The cheapest way is a piece of peg board and a drill bit with a stop collar. If you want to spend a little more money, Rockler sells a jig and specially designed drill bit. It's on sale now for $28. |
Here is a link that might be useful: Rockler Jig It Shelving Jig
|
| Thanks! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.