Return to the Woodworking Forum | Post a Follow-Up

 o
Cigarette Smoke Damage to Tabletop

Posted by vallen1 (My Page) on
Fri, Feb 11, 11 at 0:32

We recently inherited a beautiful 1950s mahogany dining suite from my mother-in-law who was a very heavy smoker. She kept a lace tablecloth on it for years, and once removed, we discovered a "pattern" etched into the tabletop finish; where the holes were in the cloth there is now a dull finish. The stain in not compromised, appears the damage is only to the finish. The rest of the table and sides still have a beautiful shine. There is also a cherry secretary where the finish is "dulled" in places, we believe from the smoke, too. We used oil-based polish and looked good for a day, but then the dullness returned. Any suggestions short of refinishing the pieces which we do not want to tackle? We've thoroughly cleaned & polished both, but didn't really affect the finish issues. Tung oil, linseed oil, lemon oil have any effect? Many thanks!


Follow-Up Postings:

 o
RE: Cigarette Smoke Damage to Tabletop

The old finish is damaged. It has to be removed to repair.

The finish may be shellac or lacquer. Both of those finishes can be repaired without a lot of mess, but you will need to learn how. Or have someone refinish them.


 o
RE: Cigarette Smoke Damage to Tabletop

Try cleaning with paint thinner.

It will not harm shellac or lacquer, but is good at removing cigarette tar that may have collected.

"Oil based polish" is not going to remove surface dirt.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Woodworking Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here