|
Wed, Jan 11, 12 at 10:06
| I've read the posts relating to what types of stain to use when staining an Andersen Pine Gliding Door. I would like to hear from someone who may have some suggestions on how to prep the door before staining, i.e., taping off the tracks and weather strips. Do I need to stain and varnish the moving part of the door first, then stain and varnish the stationary part of the door next, or do it all at the same time? I've stained french swing doors before -- no problem, but when I began taping and prepping the gliding door, I felt like I bit off more than I can chew. |
Follow-Up Postings:
|
- Posted by Woolieboolie (My Page) on Wed, Jan 11, 12 at 10:54
| Also, how do I varnish the bottom of the door between the door and the gutter without glueing the door shut? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Woodworking Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.