Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Can a person make a Christmas Tree Extension Cord?

Posted by oldalgebra (My Page) on
Sat, Dec 1, 12 at 11:53

I would like to make a long Christmas Tree Extension Cord.
They sell them with up to three outlets (each outlet has the ability to plug in three sets of lights), evenly spaced along the cord.

My plan is to decorate a long table with LED razzberry lights (13 sets in all), so I need at least six outlets.

I bought two of these extension cords, but when I got home I found that the fine print on the package says
the cord should not be plugged into another extension cord.

Is this just a cautionary statement to keep someone from plugging in a space heater, or would I be putting my dinner guests in harms way?

I've searched the internet for an extension cord that is longer and has more outlets, but can't find one. A single power strip in the center of the table won't reach all the light cords (and would look ugly to boot).

Is it possible to make a cord with evenly spaced outlets?


Follow-Up Postings:

 o
RE: Can a person make a Christmas Tree Extension Cord?

Just use UL listed parts with large enough wire and you are GTG


 o
RE: Can a person make a Christmas Tree Extension Cord?

There's another possibility that might solve my problem.

The extension cord is 15 feet long, but the length from the first outlet to the last outlet is only 3.5 feet.

I need the first and last outlet to be spaced 15 feet apart, with the remaining outlet midway between the two.

Can I safely add wire between the outlets so that the outlets are about 7 feet apart? That way, I'd only need to use one extension cord.


 o
RE: Can a person make a Christmas Tree Extension Cord?

You can use a purchased cord as a source of parts for making what you want.


 o
RE: Can a person make a Christmas Tree Extension Cord?

Brickeyee,

Do you think I can cut off the plug and the last outlet on one cord, and insert it between two of the outlets on the second cord? I was thinking of doing that, but didn't know if it was possible, since the plugs have fuses and I would be cutting one off.

Thanks so much for your help thus far.


 o
RE: Can a person make a Christmas Tree Extension Cord?

You cannot make a splice except in an approved device.

There are blocks with receptacles on them that can be wired into a cord.

The block is an approved device for making the connection inside (it will have strain reliefs and some method of making the electrical connection.


 o
RE: Can a person make a Christmas Tree Extension Cord?

You might want to do some searching on holiday lighting sites. Several seem to sell the parts necessary for custom extension cords. Will they meet any sort of standard set forth by governing bodies, probably not. Will they work, probably.

I'd suggest being careful to watch the total current draw on a custom made cord and be damned sure to plug everything into a GFCI protected receptacle.

Here is a link that might be useful: Making Extension Cords


 o
RE: Can a person make a Christmas Tree Extension Cord?

"Will they meet any sort of standard set forth by governing bodies, probably not."
As a cord and plug connected load there are not al that many standards.

NEMA is for items manufactured for sale.

Using UL listed components is all the NEC really can require.

Millions of folks have made all sorts of cord and plug connected equipment without significant problems.

Up until about the past 2- years, every HAM (amateur radio) operator made their own RF transmitter, and many other pieces of gear.

About the only thing you can screw up on this is overloading the cordage you use (to many watts of lighting for the conductor size and temperature rating).


 o
RE: Can a person make a Christmas Tree Extension Cord?

Mike K, that's EXACTLY what I'm looking for. Thanks so much. I have it bookmarked for easy reference again and again.

Brickeyee, thank you for all your prompt replies.

People here are so helpful. And I always feel that no question is too elementary.

Thanks again, everyone.


 o
RE: Can a person make a Christmas Tree Extension Cord?

Brick,

I know that certifications are for products that are designed to be sold but there's an implication of safety that goes along with it. I'm not saying that a home made cord (and I've made them) are unsafe but they could be for someone who doesn't understand what they are doing or uses it in an inappropriate manner.

The website I referenced describes making extension cords with zip cord and what they call "vampire" plugs - they simply pierce the insulation to make contact with the conductor. That's not unlike those inline, rotary lamp switches but most people aren't putting table lamps in the front yard. The websites I looked at sell SPT lamp cord to make these "extension cords". I don't even know if that type of cord is even suitable for outdoor use.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here