Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Nuisance GFCI tripping, or something worse?

Posted by gblentz (My Page) on
Sun, Sep 6, 09 at 14:03

Every now and again, the GFCI receptacle on one of our kitchen's small-appliance branch circuits trips. This occurs when our refrigerator's ice-maker water valve solenoid energizes or de-energizes. I've always been somewhat puzzled by this, being that the refrigerator is downstream of the unprotected side of the receptacle. This has happened infrequently, probably several dozen times in the past ten years, since we've lived here. But I've always chalked it up to just a flaky GFCI receptacle nuisance-tripping.

Does anyone have a more dire assessment that I should be aware of?


Follow-Up Postings:

 o
RE: Nuisance GFCI tripping, or something worse?

I never, I repeat, never, put a refrigerator on a GFCI.


 o
RE: Nuisance GFCI tripping, or something worse?

Read it again.


 o
RE: Nuisance GFCI tripping, or something worse?

OK, I've read it again. What is your take? Other option is to put refer on a dedicated circuit which we usually do.


 o
RE: Nuisance GFCI tripping, or something worse?

GFCI's are electronic devices and they usually do a pretty good job of ignoring electrical noise. That doesn't mean that they are totally immune. Evidently, there is something about that solenoid valve that gets the GFI confused & causes a trip.

Since the refrigerator is not protected by the GFI, you're in no danger of losing its contents. If it is bothersome, try a new GFI, Underwriters Labs tightened up the performance specs a few years ago & I believe the newer ones are less prone to nuisance tripping.


 o
RE: Nuisance GFCI tripping, or something worse?

Tex: Well, my 'take' is that the receptacle my fridge is on is NOT downstream of the protected side. Therefore, the fridge, though it is the cause, is completely unaffected by the effect of the trip. I'm well aware that one shouldn't put things like refrigerators, freezers, sump pumps, etc., on GFCI. You seem to be reading my post as if I have, and as a result am losing power to the fridge when it trips, which I am not. :-)

Tom: That's what I figured. I read some time ago that the newer-gen devices are more "robust" in their noise rejection. I've just been too lazy to change it out since the trips are relatively infrequent, and the biggest inconvenience is having to reach behind the microwave, push the reset button on the receptacle, and reset the time. I just wanted to be sure I wasn't missing something, and endangering myself or my family as a result.

Thanks.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here