Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Advice wanted on weatherproofing a low voltage wite

Posted by kudzu9 (My Page) on
Wed, Aug 7, 13 at 16:10

I have an Orbit irrigation system that I use for drippers in my raised beds. It consists of a battery powered digital timer which has a small valve connected to it by a wire that ends in something that looks like an RCA jack. A relative was "helping" with gardening and managed to chop through the wire with a spade. The valve unit can't be taken apart to do a repair inside the housing, so I intend to solder the two severed pieces of wire back together. However, I don't know the best way to weatherproof the splice. Suggestions, please...


Follow-Up Postings:

 o
RE: Advice wanted on weatherproofing a low voltage wite

You can buy both weatherproof wire terminals as well as goop to seal up things at the electrical section of your home center. Soldering is not required.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here