Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Do I need a Hunter speed control for a Hunter fan?

Posted by diytrying (My Page) on
Thu, Jun 16, 11 at 18:46

I have to replace my old 3 speed fan control in the wall. Light is wired separately. When I removed the old control, it is 2.0 amps but the fan has been changed several times since the switch was installed and we haven't had any trouble. We now have about a 6 yr old Hunter fan and I can't find a model number or anything on the fan. I found a 1.6 amp specifically for Hunter fans and a 1.5 and a 5 amp at Lowes. Does it matter which I use? (Couldn't stay on hold any longer with Hunter tech support.)
Thank you.


Follow-Up Postings:

 o
RE: Do I need a Hunter speed control for a Hunter fan?

The generic 1.5 should be fine for your average SINGLE hunter fan.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here