|
Tue, May 18, 10 at 13:32
| Hi. Fixture wire is 2 black.. 1 side writing on it.
Wall has 1 gray and 1 yellow. Before I start fiddling, gray would go to the black cord WITH writing and yellow to the black WITHOUT writing. ?? |
Follow-Up Postings:
|
- Posted by just_julie (My Page) on Tue, May 18, 10 at 13:39
 |
|
| One side of the fixture wire should have a raised rib... the ribbed side may or may not have writing on it. The ribbed side is the identified wire and should go to the grey wire. The other goes to yellow. |
|
- Posted by just_julie (My Page) on Tue, May 18, 10 at 15:55
| There was a ribbed edge--NOT the wire with writing on it. I'm all connected and working, thanks! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Electrical Wiring Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.