Return to the Electrical Wiring Forum | Post a Follow-Up

Circuit breaker keeps tripping

Posted by anonymouse (My Page) on
Sat, Apr 2, 11 at 22:10


We live in a newly constructed home for the past 6 years. One of the home's circuit breakers keeps tripping under the following scenarios:

1. Turning lights on/off
2. When an automatic iron that is plugged in turns on
3. When there is a thunderstorm with lightning (we will lose power to that part of the circuit)

The circuit according to what's written on the panel only has master bedroom lights and outlets plus all battery backed up (plastic disc shaped) smoke alarms in the home (about 7 of them). There are no other circuits, because everything else in the home appears to be fine. To my knowledge, smoke alarms do not draw that much current.

Could it be a faulty smoke alarm (drawing excessive amounts of current 7x24) or could it just be a bad circuit breaker?

I have a EE background, and can possibly try swapping out the circuit breaker with an identical one, or should I hire an electrician?

Your thoughts, comments will be gratefully appreciated!

Posting after a while or possibly my first post, lol, after all these years of reading excellent comments here ;) Thank you all.

Follow-Up Postings:

RE: Circuit breaker keeps tripping

It could be faulty equipment, faulty wiring or a faulty breaker.
Temporairily disconnecting the smoke detectors can eliminate them as a cause.
Swapping circuit breaker connections can rule that out.
If you have an arc-fault circuit breaker, a loose connection can cause a trip. I'd check for a tight connection in the breaker panel (hot and neutral).
Loose connections and intermittant short circuits can also be checked for at junction boxes on the citcuit, looking for any evidence of arcing. I'd start at the first junction box on the circuit and work towards the last.

RE: Circuit breaker keeps tripping

Is this a GFI breaker? I've seen similar behavior with overly touchy GFIs.

RE: Circuit breaker keeps tripping

Thanks! It is indeed an ARC FAULT (Eaton, Type BRAF).

I can't get it to turn on, I should try again, turning it off completely first, and then turning it on.

I thought I did that, now if it does not come on, does that mean that it needs to be replaced (of course, I still have the original cause to figure it out).

RE: Circuit breaker keeps tripping

It is simply a bad acr-fault. Extremely common from that time frame.
The breakers from that time are NOTORIOUS for nuisance tripping.

RE: Circuit breaker keeps tripping

I'm not familiar with the EATON BR line but I can tell you that the earlier GE AFCI's were terrible on nuiscance tripping. I replaced my MOD2 ones with MOD3 (the one with the rocker to test both series and parallel faults) and I've not had a nuisance trip since.

RE: Circuit breaker keeps tripping

It may also be that you have a neutral-to-ground fault, which will trip an AFCI. If there is, it's probably in an outlet box. Pull the outlets on the circuit and see if you find a ground wire touching the neutral screw of the outlet, or some such.

RE: Circuit breaker keeps tripping

You might see if the current type BR arc faults are newer than the one installed. I had tons of nuisance trips with the GE mod2 arc faults that went away when I replaced them with the mod3.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here