Return to the Electrical Wiring Forum | Post a Follow-Up

Replacing a switch with a photocell (dusk till dawn) sensor.

Posted by Kaliber35 (My Page) on
Sat, Mar 12, 11 at 19:47

My deck has lighting controlled by a switch. There is also an outlet in the line I think. I am trying to replace the switch with a photocell. Ive been at it for over an hour and have concluded that I am way over my head. Please offer advice. I can provide more pictures if needed.

If it helps, I think the wires coming from the bottom of the top box are from the lights and the wires coming from the back of the top box are from the breaker box.


Follow-Up Postings:

RE: Replacing a switch with a photocell (dusk till dawn) sensor.

First of all, where is/was the switch?
Where does the red wire, connected to the gold terminal of the receptacle, come from? A switch or the breaker?
The wire connected to the silver terminal of the receptacle should be white, not red, and connected with the other neutrals.

You would not want the receptacle to be controled by the photosensor. Its amperage rating is not sufficient.

To install the photosensor, its black lead connects to the hot leg from the breaker panel. The white lead connects to the neutrals from both the panel and the lights. The red lead connects to the hot leg going to the lights.
I would have a switch on the hot (black) lead going to the photosensor in order to turn the lights off should they occasionally be not wanted on after dark.

RE: Replacing a switch with a photocell (dusk till dawn) sensor.

Ok, the switch was to the left of the outlet. The red wire went to it and I believe the white wire was with it (on the same terminal).

So, Im still really confused. The black wires together in the back remain by themselves? I should remove the short red wire and replace the other red one with the white from the breaker?

I want the outlet to remain there, but would it be easier to simply remove it at this point?

RE: Replacing a switch with a photocell (dusk till dawn) sensor.

Sounds like you took things apart without taking notes or pictures.

At this point, I'm afraid you are probably in over your head. You could pick up a copy of Wiring Simplified at the library, bookstore, or even Home Depot, and spend a few days reading and studying. Then you'd be at least somewhat better prepared to work out where to go from here. But you might be better off to call in a pro to sort things out.

RE: Replacing a switch with a photocell (dusk till dawn) sensor.

Ok, thank you. I wanted to take a picture before I started, but forgot in the excitement of my little project. I really thought it would be fairly simple. Thank you for your help and advice!

RE: Replacing a switch with a photocell (dusk till dawn) sensor.

CAUTION: Black wire is 120 volts, so turn off breaker before attempting.

Here are the wiring instructions:

Sensor's black wire connects to black wire coming from house

Red sensor wire connects to light's black wire .

All 3 white wires (house, sensor and light) are connected together.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here