Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Determining what circuit a wire is on

Posted by drewguy (My Page) on
Tue, Feb 5, 13 at 11:26

When our house got rewired the electrician was a bit lazy and overloaded a circuit (or at least created a circuit with the potential for overload).

I think I've found the wire that links two sets of light switches with power. (Previously one bank of switches was fed from the circuit . . . it appears he pulled power from the first bank to feed a second bank of switches).

This wire is easily accessed in our unfinished basement, so I could add a box and run a new wire back to the panel and add a circuit . . . problem solved.

But, how can I confirm which circuit this wire is on, to be sure I'm right? I don't want to cut it -- obviously if I did so I could tell at that point by wiring on an outlet or bulb. Any type of circuit tracer for this situation (I have one with the plug-in module)


Follow-Up Postings:

 o
RE: Determining what circuit a wire is on

Most receptacle circuits have a potential for overload. Once you have more than one receptacle on a circuit nothing precludes you from plugging two 20A appliances in. This is why bathrooms, laundries, and kitchens have specific requirements.

The best bet would be to trace it back to the panel and kill the breaker that it's connected to and be sure the loads you want to move go out with power.

This is one time a non-contact tester might be useful. Touch the wire to see if it triggers. Then go shutoff the breaker for the circuit you THINK it is, come back and see if the wire now appears to be dead.


 o
RE: Determining what circuit a wire is on

Sorry . . . I know what circuit all the lights are on (I've turned it off and all these lights turn off.).

I'm trying to confirm that a wire that runs from one set of loads to the other set of loads in fact connecting those two load points. A non-contact tester would require cutting the wire, no? (I can see the wire in the basement, but can't confirm what it's connected to in the walls above)


 o
RE: Determining what circuit a wire is on

A non-contact tester does Not require cutting the wire.

Here is a link that might be useful: Using a Non-Contact Tester


 o
RE: Determining what circuit a wire is on

Aaah. Thanks. That sounds like it should do what I need.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here