Shop Products
Houzz Logo Print
bayflyer

forgot to take a picture of old wiring

bayflyer
11 years ago

I know this is probably an easy fix but I do need help. I am remodeling a room which involved taking down a wall.
In that wall were two single pole switches getting power from an outlet on an adjacent wall which is still the case in the new setup.
Within the new 2 gang box along with the switches is 14-2 with ground and a 14-3 with ground cable which goes to the first ceiling light
where it terminates and 14-2 with ground continues to the second light operated by switch 2.

Add'l info: the wiring at the first light is as follows. the 2 blacks are wire nutted. the 2 whites have a pigtail which goes to the fixture and
the red goes to the fixture. the black and white go to fixture #2.

Ok, finally here's the question. How do i hook up the switches? If I had only taken a photo I would be fine but of course i did not.

Thanks for reading,

Joe

Comments (3)