Return to the Electrical Wiring Forum | Post a Follow-Up

 o
Replacing a duplex Receptacle, but new one has no feeder

Posted by Kev84 (My Page) on
Tue, Jan 28, 14 at 14:40

Hi All,

I recently got into home automation and bought one of these:

http://www.smarthome.com/59489/GE-45605-Z-Wave-Wireless-Lighting-Control-Duplex-Receptacle/p.aspx

to replace one of these:

http://www.homedepot.com/p/Leviton-15-Amp-Tamper-Resistant-Duplex-Outlet-10-Pack-White-M22-T5320-WMP/100684043

.

The problem.

The old one had black and white come in AND black and white OUT (feeding the next receptacle).

The new one i bought only feeds out 3 wires black, white, green.

There fore the problem is, my current receptacle is replaced, BUT there is no power going out to the next receptacle, as the new one does not have a feeder to go out.

My question is, is there a solution to this problem, or simply, if i use one of these new switch without a feeder, its over for me.

Thanks and regards,
Kevin


Follow-Up Postings:

 o
RE: Replacing a duplex Receptacle, but new one has no feeder

You just connect them with the wirenuts. There is a picture in the instructions showing wirenuts from the line-in to the receptacle. Just connect the black, white, green/bare with the line-out.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Electrical Wiring Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here