Kimmsr wrote: > ....1/2 inch mesh galvanized hardware cloth in the same size is about $350.00. Kimmsr, that's not a good price. Here's a much better price :-) A 4-foot-tall, 50-foot-long roll of 1/4-inch mesh galvanized hardware cloth on Amazon is $73, which includes free shipping. It's the best price I've found anywhere, except for the occasional seller on Craig's List. Here's the link: Amazon's 4x50-foot, 1/4-inch roll I got mine through Craig's List from a great local farmer who had some new stock he had never used or opened. It was a quick 35-minute drive to his place in O'Fallon or Shiloh, Illinois, really close to SWIC. I'm in Missouri. A 1/2-inch mesh roll is $13 more on Amazon for some reason. A 100-foot roll of 1/2-inch mesh on Amazon is $155 to $177 which includes shipping: 4x100-foot roll of 1/2-inch mesh I'm a cheap guy so I searched everywhere before buying the hardware cloth like: Froogle.com PriceGrabber.com The Big Box stores Ebay.com Local hardware stores like Tru Value (did you know different local Tru Value stores sell at different prices. I guess each is individually franchised. Thanks for the Bennecky's Tru Value tip, Robertz6--Bennecky's Tru Value has better pricing than the Tru Value close to me.) Amazon.com and Craig's List and maybe a couple other places I've forgotten.

Truck is running after charging the battery. Radio didn't sound weak (didn't check lights) but just not enough to turn over. DH cut 6 ft hoops out of the 9AWG wire and I got bird netting up over the strawberries (going to be a pain to get in there, we put so many pegs in to hold it into the ground and keep critters out). Pulled a bunch that strayed, waiting to hear if my cousin wants them, if not I might pot them up tomorrow to sell ? DD helped me pot up a couple dozen cherry toms that were outgrowing the 7206 (is that the right term?) 6 packs. DS helped DH put up the deer netting around the garden - DH put in T posts and cable-tied the ENT to them, but since he expanded the garden the 100ft we had from 2 years past wasn't enough. Only need 30ft more and I didn't want to cut the 100ft roll I bought at HD the other day so we just knocked off to clean up and run to local ice cream shop for burgers and cones before DS has another Scout thing. I swear he's got something going every night! Still waiting to get pix from guy who has the PVC fencing on CL. But the T posts with ENT will be fine for this year, not sure we should leave the netting (or the ENT?) out over the winter but not going to pull the T posts now. DH was cursing - I guess they don't have rocks in TX?! If I don't order from Farmtek or figure something by the time kale, etc. is ready to go in (tonight is 1st night outside) I'll just put up the 100 ft I have overlapping 70ft of it so I don't have to cut it - we'll probably expand the house garden more in the future, seems we do every year. Just means DH has to put in 2-6 more T posts ;-)

I climb up the attic open the door at furnace and find out there is a transformer that step down 120 v to 24 v . and two terminals at the second end (24v) red terminal is power 24v and the other terminal is use to connect to frame or chassis and serve as common ground so a c wire is any unused wire you can pick any color you want in the same bundle that goes from the furnace to the thermostat in my case those extra wires are trim flush to the bundle jacket on both end so I need to peel that jacket off about 2 inches on both end and connect a single wire about 2 foot long from the frame to the wire you selected (let say black) on the furnace end then the black wire on the thermostat end will be "C" wire and connect it to the "C" terminal on the new wifi fancy Honeywell or Nest. If I say anything wrong please correct me. I will do this at some other time. for now I just thinking. I signed up for smart (something) at gapower.com and they will sent me a nest gen.3 for free. I think this nest also will need "C" wire. I wait till I get the Nest then I will install both the Nest and the Honeywell at same time I will put the Nest down stair and Honeywell up stair.

The 5 ft almond colored steel raceway Plugmold made by Wiremold was only $33 or so at HD when I bought the replacement one last fall. It isn't child-resistant (but neither is the rest of my 2007 vintage house - I think that went into NEC effective 2008, but not sure it would apply to plugmolds if they are 55" off the floor under your upper wall cabinets, and over a 2ft counter so kids can't reach? Ask your electrician). I checked, mine is 15A but that is fine for small appliances - again, I would check your KitchenAid mixer and see how much it pulls, if you think you'll be running a large small appliance on the strip then I would have that one put on a separate circuit, even if 15A is OK. Don't want to pop the breaker running the coffeepot, toaster, and microwave all at the same time! I wouldn't plug a microwave into anything less than a 20A circuit, some of them can pull close to 15A all by themselves. If the end will be fairly well hidden and your electrician is neat, he can always cut down the raceway with a hacksaw, you might even be able to buy a 5ft section and make 2 out of it if you buy extra end caps. The wiring is easy, the hardest part of the Wiremold assembly is tapping the cover on - "striking sharply with hell of hand" - OUCH! was tough to do in tight space even with a wooden block, even for someone who had done it before (electrician). The wiring was a bit of a pain - not much room inside, when I installed the first one I took out the first receptacle to have room to work behind it, the electrician did the same with the replacement (I keep a child plug in to remind myself it's not functional). www.wiremold.com I don't know if they'll sell direct, but if you contact them they may be able to tell you where to buy (or order, if you want specific color, they have steel, aluminum, nonmetallic, almond, white, silver/stainless, black, etc.).