Return to the Windows Forum | Post a Follow-Up

 o
Trim help

Posted by ajpdla (My Page) on
Sun, Oct 18, 09 at 14:59

Sometimes, I feel it's the easiest things which become the hardest to figure out.

I need to cut some "shims" to balance out the 1x6 interior trim for our new replacement windows.

The sill drops at a 15 degree angle from the top of the interior sill to the base of the installed window.

I can't figure out for the life of me how to cut these shims on my table saw.

Can someone help me figure this out?

I have pictures if you need to see them. I didn't see how to link them here.

Thanks.


Follow-Up Postings:

 o
RE: Trim help

Turns out my settings on the table saw worked out. Thanks.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Windows Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here