|
Fri, Sep 24, 10 at 21:31
| Ive undertaken a shed building project and I have no experience what-so-ever, but am taking on the challenge. I purchased replacement windows from a mfg who happen to have 3 windows in the size I need for cheap. They are 15.75 by 23.5 high. My question is how do i frame out and install these "replacement windows" in the construciton of a new shed. |
Follow-Up Postings:
|
- Posted by windowsonwashington (My Page) on Sat, Sep 25, 10 at 16:09
| Get a clip in accessory that converts the exterior to a nailing flange. Nail off the window when square and plumb. Tape the flange, you are done. |
|
- Posted by Jumpilotmdm (My Page) on Sat, Jul 14, 12 at 21:58
| Or, frame the RO like normal but install a wood "stop" at the outside of the RO about 3/4" thick & flashed at the top. Set the replacement unit from the inside against that stop, trim and viola! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Windows Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.