Return to the Windows Forum | Post a Follow-Up

 o
Alside sliding doors

Posted by berkeley223 (My Page) on
Wed, Jun 19, 13 at 14:43

Are Alside sliding doors any good? I was quoted $1750 for one, installed. Can't find too much on here about those kind of doors.
thanks!


Follow-Up Postings:

 o
RE: Alside sliding doors

You'll find plenty of opinion on their windows... Door offering is very consistent with their windows in my experience.


 o
RE: Alside sliding doors

thanks----in your opinion is the 6100 sliding door good, and is 1750 a good price?


 o
RE: Alside sliding doors

No idea on the price but a little searching will tell you that no pro in is right mind will sell you anything in a window or door manufactured by or for Alside!


 o
RE: Alside sliding doors

Personally I'd recommend a door with a fully welded frame and a better Air Infiltration(AI) rating. Some doors are as low as .06cfm3.
A sliding door is a huge opening in your wall so you really want to make sure that you get it right.
Depending on options and install circumstances, $1750 is on the low-end for a good door, but not completely out of the ballpark. You are probably gonna be around $2k give or take. Obviously more options can send that higher pretty quickly.


 o
RE: Alside sliding doors

The 6100 is actually not a terrible door. It is a knock down frame (i.e. not fully welded).

If you are going to be at or around that price point, I think a door that fit the criteria that HomeSealed mentioned would be worth considering.

Look for something with some nice features, great aesthetics, tight air numbers, good thermal data, and a high Design Pressure.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Windows Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here