Return to the Windows Forum | Post a Follow-Up

 o
Please help me fix bad window design decision!

Posted by Madeline616 (My Page) on
Sat, Apr 6, 13 at 16:51

Hello,

Jumping over fro Kitchens, where I've x-posted this question:

Hi all,
Sorry for the typo--I meant *bad* sink window moulding decision.

I could really use your opinion/ideas. Question posted below pics:

Basket weave b-splash (same corner where cookbooks are in pic below):
 photo Bsplash.jpg

Pics of area in question:
 photo Wideshotsink_zps73e31aa3.jpg

 photo WindowClose_zps4066de7d.jpg

I'm regretting this window moulding decision as much today as when it was installed year ago. I've lived with it, and it's still driving me nuts.

I have this basket weave tile b-splash, which I adore, along the sink run.

Rather than continuing the tile run straight through under the window and putting traditional wood moulding along the bottom of the window, we put a large piece of marble below the window. Bad decision.

It's big and chunky, but worst of all, it ruins what should be a continuous visual line of the basket weave tile.

I think I know what has to be done, but I wanted to start with an open mind and try to get some input from the GWers.

The marble counters are *fragile* and prone to chipping, so that needs to be factored in.

I'd just like a traditional window moulding all of the way around the window, with the basket weave tile running straight through as with most sink windows, below the bottom piece of window moulding.

My idea is to have my very meticulous GC carefully remove the marble piece and window moulding, and have new wood moulding installed all of the way around the window.

The tile installer could then continue the basket weave tile straight across, under the new wood window moulding.

I know the basket weave design won't line up exactly--there'll be a small gap, which I can live with. We'd fill it in with a narrow, vertical piece of pencil moulding or a wider grout line. (My pewter canisters hide that, anyway.)

Alternatively, we could "bump out" the new wood window moulding at the bottom 1/2", and then it wouldn't matter whether the basket weave tile lined up perfectly, as the "bump out" would provide a visual transition.

My other idea is to install the bottom moulding and b-splash tile below it, applied/adhered directly *over* the existing marble.

The marble would serve as the "bump-out" for the bottom piece of wood window moulding and the strip of tile below it.

This would prevent potential marble countertop damage during removal of the marble piece, but is it possible to install wood window frame moulding and tile directly on top of marble? Will it adhere?

Any thoughts or ideas on how this project should be approached would be greatly appreciated!!


Follow-Up Postings:

 o
RE: Please help me fix bad window design decision!

I do not have any ideas for you, but I think the marble is beautiful with the gorgeous basket weave tile. I am sure someone will have good ideas for you. Peke


 o
RE: Please help me fix bad window design decision!

I'd go with your 1st plan so you don't regret your decision again. It should be easy to do without damaging your countertop. The tile should be able to be lined up without any vertical trim if they weave in the weave an would look better.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Windows Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here