Return to the Trash To Treasure Forum | Post a Follow-Up

 o
Adobe pdf

Posted by lynndianne (My Page) on
Fri, Jul 13, 07 at 9:56

I'm hoping someone out there can help a tech challenged person (me). When I try to print a pattern which needs to be enlarged I put in the enlargement figure (example increase from 100% to 125%) and print. The printed pattern usually comes out at 100% instead of 125. There is a scale block at the bottom of the pattern and when I measure it, it comes out 3/4 inch instead of 1 inch. Any ideas of what I'm doing wrong? Many thanks, Lynn


Follow-Up Postings:

 o
RE: Adobe pdf

Gosh, looks like there's no one here with an answer to help you Lynndianne. Wonder if someone on the Computer Crafts forum might be able to help? You might try posting your question there. Good luck, I hope you find a solution. Luvs


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Trash To Treasure Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here