My first house I owned with my ex-husband had a porch added onto the side of one of the bedrooms, and they left the window in, so it overlooked the new stairs down into the basement. Frankly, it just looked bizarre, and made setting up furniture on that wall very difficult. You don't say what the rooms are going to be where you are "losing" the windows, but if you are concerned about the loss of light, I would recommend "replacing" the window with a tubular skylight in the ceiling over where the windows are gong to be walled over--they add a shocking amount of light, and I love mine. In my kitchen, which had been very dark, now I keep thinking the lights are on when they are not, it's just the tube bringing in the sun. Carla in Sac

Living room is gutted & so is master bath windows are 75yo double hung 6/1 - so while I'm gutted I would like to do what I can to insulate ..... any advice other than the standard what is it R15 bat thanks eileen

The answer to your question depends on where you are financially and what the house is like. I'm thinking this is not a colonial mansion in Moorestown, NJ. The vinyl siding gave it away. With that in mind, there is no way I would spend that much money on those particular windows. I would replace the rotted parts of the sills. This is most likely only the outer 2 inches or so, where moisture has been trapped under the ext trim. I would also replace the brickmolding (ext trim). I would then have these openings wrapped with the aluminum of your color choice, making sure that that is sealed properly, and also installed behind whatever drip cap is above. What I'm describing is not expensive work, perhaps app $200 per opening, including material. It is also not time consuming work, and fairly straight forward. I would then choose a quality replacement window with an insert installation, preserving all your interior trim. I would think you could have all this done for less than $1k per window or so. It could be argued that the technically correct way to do this right is to gut the openings and go with full frame methods, all new everything in and out. But replacement windows are called replacement windows for a reason. It is not always desirable to replace everything. For instance, if those wood windows of yours have a rope and weight balance system, then there is a large weight pocket behind the jambs. It's just not worth it to take all that apart unless you're wealthy or doing it yourself. Just get the best window you can. I suggest fiberglass framed so that you won't lose glass space. If that doesn't bother you, high end vinyl will work as well. But don't skimp on the window. If you do, you will be back in the same boat in less than 10 years. One more thing. The aluminum wrap on the outside can be bent in such a way to have a brickmold profile. This is much more professional and attractive, and shouldn't cost any extra if you have true professionals doing the work. Good luck!

Cut them down to make placemats and table runners. Make some pillows for the couch. Swag over a window.