Well, I am supposing that you know that you need a LOT of plant material to make one drop of EO... I would distill something else first so you know what you are doing. You might get a book on distilling... not everything smells the same distilled as it does on the plant. I can't stress enough how much plant material it would take to make a half an oz of eo. I am thinking that you might get a couple drops of eo from about 5 gallons of lavender leaves...

At $25 that one on E-bay is a little pricey. Kimbrew Walter Roses has a 2-1/2" Plastic Lapel Vase with Metal Pin for 25 cents, less if purchased in quantity. Years ago, I'd buy a hundred of them for 22 cents each and pass them out with a rose bud to the mothers in my church on Mother's Day. Here is a link that might be useful: Kimbrew Walters 2-1/2

Just did this for my sister, what exactly are your concerns? Just about any oven can be placed underneath, you only need to be mindful of clearances ( usually an inchor two) needed for both ovens. You don't want hot air exhausted from one to be sucked into the other. Her's is a GE Monogram under the Miele, the stainless is a petty good match too, though I have heard that GE has gone to a diff. supplier or spec so there new SS doesn't match the stuff off a year or two ago. Have no idea how the new looks with the the Miele either.

Not looking to have many features with our build. Do not live in a subdivision where I would need drawings and approval of a HOA. We live in rural area with little need for major landscaping. Some type of firepit would be nice. What I have is a area approximately 40x65 to sandwich our pool into. This area being between our house and our old workshop. Just built a new 40x50 shop. Our plans are to build a pool and then convert the old shop to a pool house. With restroom, kitchen and seating area. With large french doors looking out to the pool. Will also need to install a fence around the new pool. Anyone else use gunite to build walls around pools for fencing?? Thanks