Shop Products
Houzz Logo Print
bamasusanna

Breaking glass flowers

bamasusanna
16 years ago

Here's how I do it.

Step 1: score flower stem approx 1/4" from flower.

{{!gwi}}

Scored stem

{{!gwi}}

Step 2:

Now, find a hard surface with a straight edge. In this photo I used the edge of a stone, but you could use a brick or perhaps a table edge would do.

Line up your score line with the edge.

Tap the score line on whatever hard edged surface you're using. Flower should break on your score. BE SURE you have somewhere for your flower to fall that's safe. After all this you don't want to break THAT!!

Step 3:

If your little piece of stem is still a tad too long, you can grind it down.

{{!gwi}}

To insert in my mirror, I dremmeled a hole out the size of the stem. The MDF was 1/2" thick, the hole was about 1/4" deep. This will give you room to really secure the flower with a lot of glue.

I do not attach the flower until AFTER I have grouted. This way you're not trying to smoosh grout up under the flower!

{{!gwi}}

Comments (15)

Sponsored