Return to the Stained Glass & Mosaics Forum | Post a Follow-Up

 o
Wet tile saw help please

Posted by daisyme (My Page) on
Tue, Sep 16, 08 at 22:00

I bought a wet saw recently and am attempting my first usuable squares. Can anyone tell me how to cut the different size plates (let's assume it's a solid color) to maximize squares? Also, when do you cut off the footers?

Maybe someone has a tutorial in their files to help me?


Follow-Up Postings:

 o
RE: Wet tile saw help please

'morning, DAISY: I offer what I do - someone else may have a better system. I go in w/the saw sometimes TOO the footer, w/cuts about one to one/half inch tiles. If the design inside the footer is nice, you can grind off the footer or leave it on to place on a subject as a focal. If you want the footer off the piece, draw a circle w/permanent marker around the inside focal, and go past the footer w/your saw to that drawn circle. You can sometimes break off your tiles by hand or a gentle tap w/a hammer, but if not, take your nipper to it. Then if you've gone past the footer, take your nipper to your new sawn tiles, and nip off the footers. You can also nip your tiles in half. Depends on the plate design. You can use the blade of the saw to grind off the rough edges of the focal, or w/your nipper. As you get more practice, you'll be a pro in no time.


 o
RE: Wet tile saw help please

Daisy, thanks so much for bringing this up. I have been thinking of getting a wet saw .. What kind did you get?? What kind do you have Slow??

Slow, as always, you are a true jewel!! We are so blessed to have you hear on the glass forum. Gee, if I had ONLY known you for the 20+ years we lived in Texas, and many years we traveled to dog shows in Texarkana..


 o
RE: Wet tile saw help please

Thanks so much, Slow. I did essentially that yesterday but didn't think to knock the pieces off with a tap of a hammer, so lost a piece by sawing through it to get to the end to cut it off.

Mermaid, I bought a $60.00 saw through Harbor Freight. Flag recommended HF to me, and the price was right. The saw is lightweight and easy to use. I'm having alot of trouble with chipping, but I don't know if it's the plates or the saw. I'm going to get a really good new blade (it's actually a wheel) and see if that helps. HF offered to replace the whole thing for me, but I haven't gone back to them yet, as I'm not sure it's the saw's fault. Good luck! Let us know what you buy and how it works for you. Have fun!


 o
RE: Wet tile saw help please

Glad you're working, DAISY, and had figured it out for yourself. It's not hard at all. MER - How kind of you for those sweet words. I'm sorry we didn't connect here too. I've only been here six yrs. BAMA lived near enough to visit too, until recently. FLAG is just a 20-min. drive from me, but we don't get together often cuz we're both busy playin' too much. Re what saws I have - a 7-inch Qep from Lowes, the $150 7-inch from Harbor Freight, and the Taurus Ring Saw, which I seldom use.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Stained Glass & Mosaics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here