|
Sat, Aug 15, 09 at 10:57
| I'm about to start a project but could use some advice or just confirmation. I am going with stained glass on concrete board and have got some silicone II XST. Will this be okay as an adhesive? It will hang outdoors in Mexico, bright hot sun and then the rainy season. Please let me know, I'm dying to start.
Thanks Mattie |
Follow-Up Postings:
|
- Posted by calamity_j (My Page) on Sat, Aug 15, 09 at 12:17
| Sounds good Mattie! As long as the silicone adhesive says indoor/outdoor and says adhesive on it somewhere! Just remember what color or clear the silicone is, it will effect your glass color...with that said, are you going to share this work in progress(wip) with us...pics???? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Stained Glass & Mosaics Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.