Return to the Stained Glass & Mosaics Forum | Post a Follow-Up

Stained Glass lighting

Posted by dick114 (My Page) on
Thu, May 24, 12 at 11:43

Any advice please on how to properly backlight a stained glass panel mounted on a box frame - approx. 4'x4' and 4" deep.
Panel is to be mounted outside a building.

Thank you

Follow-Up Postings:

RE: Stained Glass lighting

Hello DICK. If you'll post this on the discussion side, you'll get a response. Memers don't visit this side often.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Stained Glass & Mosaics Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here