Return to the Soap & Candle Making Forum | Post a Follow-Up

Removing soda ash from homemade soap

Posted by bsnyder (My Page) on
Wed, Aug 29, 12 at 22:01

I have been making cold process soap for about 4 years now, and I know that a couple of popular ways to remove soda ash is to either scrape it away (with a chisel, or something similar), and I've heard of soapmakers using rubbing alcohol to remove it.
But I have done some research on the chemical reaction between citric acid and sodium carbonate (soda ash). In perfect combination, it yields sodium citrate, water, and CO2(gas form).
I have one of my rare batches that actually started to set when I had to hurry to get it into my log molds, which left the surfaces uneven. Rather than scraping off the small amounts of soda ash, I saturated a folded paper towel with regular strength lemon juice, and used it to remove the soda ash.
It removed it easily, and beautifully. The sodium citrate left is so small, that there will be no need to rinse off the soap afterwards. Especially since sodium citrate is water soluable, so when you lather up with it, it will be that much more dispersed (weakened), and can actually help a tiny bit with the soap being slightly basic.
Has anyone else tried this method? I would love to hear your comments.

Follow-Up Postings:

RE: Removing soda ash from homemade soap

I make cold process too, but I've never heard of the lemon juice thing to remove ash. I'll definitely try it :-)

RE: Removing soda ash from homemade soap

Interesting! I have heard of using alcohol, but never lemon juice.

RE: Removing soda ash from homemade soap

I have steamed ash away by holding a bar in a folded paper towel over a teapot. It works great. I like the lemon juice idea, will try it next time if I need it. Thanks!

RE: Removing soda ash from homemade soap

I just started making soap. I have looked up the ash issue and thought about this long and hard. I have hard that its the left over reaction to sodium hydroxide. The lemon came into mind when I show that using lemon in soap making didnt work for some. It cancel each other out. So I thought to use lemon to wipe off the ash in my soap and it worked. My soap is very nice and shiny and I will be using it more.

RE: Removing soda ash from homemade soap

I realize this is about REMOVING soda ash. I use the 90% alcohol to spritz it right after it goes in the mold, so I rarely have ash. I have steamed it and/or rinsed it off. I never realized lemon juice would work. One can also just "embrace" it. It is purely cosmetic.

RE: Removing soda ash from homemade soap

Thanks for bumping this up, SadieRose. I always have issues with soda ash and I do spray the surfaces with alcohol before insulating. I do a lot of individual molds and I read that this can increase ash. I usually just "wash" it off but I am definitely going to try the lemon juice trick.

Thanks to the OP for sharing.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Soap & Candle Making Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here