Return to the Sewing Forum | Post a Follow-Up

 o
Would this work for 'closet curtains'

Posted by brendainnj (My Page) on
Mon, Mar 15, 10 at 22:04

Hi, newbie here...I've done very little sewing but did manage to make many of the curtains in my last house with a friend's guidance. Now, we've moved again and have 2 (5') closets in my bedroom with sliding doors that I'd like to replace with curtains. Now here is my simple idea: Get 2 matching queen flat sheets, cut each in half. Sew up the sides, hem the bottom & put buttonholes in the top so I can use a tension rod with shower hooks to enable them to slide easily. Of course first I have to locate a good used machine which does buttonholes(!) but I'm just trying to see if this is do-able. Is there anything I should be careful of? Should I space the buttonholes just like on a shower curtain or closer so there's more gather?

Thanks ladies for any help you can give!


Follow-Up Postings:

 o
RE: Would this work for 'closet curtains'

Hi brendainnj:

I have a couple of suggestions. I wouldn't cut them in half. They will always be gaping in the center. Put them right across and then you can access the closet from either end instead of the middle.

I would mount a rod above the closet. Tension rods have a tendancy to slip, especially when the curtains are constantly being moved. They have nice wooden rods with wooden rings and clips that you can clip onto a straight piece of material. Another option is large grommets on the top of the curtains. Both would move easily on the rod.

Since these curtains would hang straight you could use double bed sheets, but get a good quality so they have some body to them. I would also suggest you sew in some curtain weights in the hem. They will help with them hanging straight. If the sheets have a selvedge edge then cut off the selvedge and hem the sides or you'll end up with a wonky hem.

A queen sheet is 90x102 and a double is 81x96


 o
RE: Would this work for 'closet curtains'

Thanks oilpainter...I hadn't really thought about the middle gaping, I was just trying to make the closet more accessible. And I did consider the rods for overtop the doors; it's just that these large rods tend to be out of my price range--I'm trying to do this very inexpensively or my DH would never agree to it (he thinks it's "weird" to have curtains rather than doors). So I really can't spend $40 or more for each just because I don't like the doors. We have little cups(?) inside the closet that the clothes rods sit on (they're screwed into the wall) but I'm not sure if they make them anymore. BTW, are the weights difficult to sew in?


 o
RE: Would this work for 'closet curtains'

No the weights aren't difficult. You sew them to the part that turns up and just do an x over them. You could use wooden dowels for the rod and just add a finial and paint or plain cottage curtain rod.

If the only reason you are doing curtains is because you don't like the doors there are many things you can do to camoflage them.

The easiest is to paint them the same color as the room. They will blend right in and you'd scarcely notice them.

Investigate wall paper. There are some different ones out now that look like fabric or tin.

If it's a plain slab door you could add 1/4 inch trim to make them look like panel doors.

Investigate the art of trompe l'oeil.

Google camoflauging a closet door. I'll bet there's lots of ideas on the web


 o
RE: Would this work for 'closet curtains'

Sorry, I should have been more specific--I don't like how the doors restrict the access to my closet. I'm constantly closing one side to get to the other, which is why I want the curtains to open in the middle. My son took his off and it's wonderful to be able to access the whole closet. But my closet is not as neat as his so I need a cover!

Thanks for the idea about the rod; I didn't really consider making one.


 o
RE: Would this work for 'closet curtains'

Lots of good suggestions. I have another one that will make it even "less sew" if you do use sheets. Use the top hem of the sheet as your bottom as it probably already has a a nice hem. Then cut the top and hem it to get the right length. Clips or grommets would make it almost "no sew".


 o
RE: Would this work for 'closet curtains'

I did this with a tension rod on the closet of my sewing room. I have had no trouble with slipping or anything like that. Sheets are great to work with making these. you might also want to consider tie backs. Some people do that.


 o
RE: Would this work for 'closet curtains'

If you do split the sheets then overlap them by an inch or 2 on top to avoid gaping. A tie back hook on the wall would allow you to slip the curtain behind it while you are searching through the closet. They can be as simple as a large knob or the hooked ones


 o
RE: Would this work for 'closet curtains'

I use them all the time...I just open up the top part and use it for the chanel.....I sew a small place for gathers above the rod. Yes they still make the little 'cups'. You can get them and metal closet rods at the local hardware store such as Lowes and Home Depot. The nice thing for me is that I can take them down and wash them.


 o
RE: Would this work for 'closet curtains'

Thanks everyone for your suggestions! I think I will try the tension rod first, and if it slips, I'll go to the standard closet rod w/cups. The nice thing is that there is a small piece of moulding that will cover the rod part so it's OK if it's not beautiful at the top.


 o
RE: Would this work for 'closet curtains'

I used a shower curtain tension rod, it holds really well.
Kathy G in MI


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Sewing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here