|
Thu, Jul 4, 02 at 17:03
| When I print on vellum - and let it sit to make sure the ink is dry - it still smears. I'm using good HP ink cartridges. Any suggestions. |
Follow-Up Postings:
|
- Posted by Diane_SWMich (My Page) on Fri, Jul 5, 02 at 8:53
| hi, i don't have an answer for you, but i have a link to a message board where you could get a answer. scroll down and you'll see the link for the message board on the left. lots of useful info at the site too. check it out! di (sorry for the lower case, i'm typing one handed) |
Here is a link that might be useful: graceful bee
|
| I have never printed on vellum but I have a friend who does. She said that if you are using an ink jet printer that there is vellum you can buy that is made specifically for ink jet printing so the ink will not smear. She said you can but it at Michael's the brand is Strathmore. below is also a link that carries it. She also said the only way for it not to smear is to use a laser jet printer. Hope this helps. |
Here is a link that might be useful: http://www.artpaper.com/vellums.html
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Scrapbooks Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.