So you could try Mikie's idea of installing the Scanner on your Win 8 machine to see if it works so you only need one computer. If you old computer is a factory build you could not use your XP operating system in the new case because it is tied to the motherboard on the old machine. You can use the Easy file transfer to move all your personal stuff to the new confuser, works great and very simple to use. If the scanner works on the new computer and you have successfully transferred all your stuff you could then possibly install the drive from the old computer, reformat it and then do as you wish with it. I say possibly because the old computer may have an IDE drive where the new one will have a SATA drive. Being this far into SATA use I doubt your new computer will have an IDE connector on the motherboard. To see what hard drive is in the old machine remove the side panel and look. The newer SATA drives are connected to the motherboard and power supply with cables about 3/8 inch wide where the older hard drives has a data ribbon almost 2 inches wide and the power was 4 wires into an almost one inch wide plug.

HI dancing girl ! Alot has happened since I purchased my pe scan! 2 new embroidery machines 1 old version of Disney then a new version of brother embroidery machine ....I haven used my pe scan but once! I tryed using it yesterday. ....it no longer works! Tryed looking it up on brother website but there is no such item must be so outdated! I took it apart today and fuse is black I need a new fuse ! But I don't know what kind of fuse it is! Brother is closed on Sunday :(. Maybe you know someone with this information the rest of the machine is pristine! But the fuse! ...I JUST ORDER THE BROTHER SCAN N CUT LAST WEEK! I'm so excited I'm wondering if I need this machine anymore now that I have the scan and cut I might be able just to transfer to pe design after I scan on cut n scan or I can just transfer it to my machine after that it sounds complicated to me so if I have to but a new one I might just get the flip pro scanner for brother I found one for 135.oo. so I have to wait till next month unless the cut n scan works?? If anyone knows anything about the only fuse that's inside the pe scan let me know ! I like to use this for lace if I can fix it! Thank you so much!! Dancing girl! !

We sure did and I was glad to see you response--I had no luck finding the thread. I sent about a dozen negatives to a commercial scanning service and received a CD with very high resolution scans. That was about the time I was hoping to do more myself to save money and got good information from you. My negatives are of varying sizes and quality. I still don't know to what degree a scanner can adjust to denser or thinner negs. Sometimes working with a professional isn't easy. Some of the hand selected negatives were contact printed by student interns is a real darkroom with decent results. I intend to use the best images in an exhibit or two and a PowerPoint presentation to celebrate and educate about a historic district I just got declared elibible for the National Register of Historic Places. I'll take the best legibility I can get and be happy for my goal. During a visit today with the prof, a contributor to my work, I basically heard way too much about the quality of the negatives--too thick, too thin, scratched, poor photographer, improperly stored 60 years ago. As a perfectionist in her craft, she sees these problems and says we can't do much. My approach is if there is a problem, let's solve it. I am at the stage of selling my approach and getting her going. No one had actually scanned anything with the Epson, so I suggested we give it a try since I drove there to see the scans. She put a decent 3x5 neg right on the glass and the Epson produced a great image. I inquired if there needed to be a negative holder and that drew a blank--despite what the reviews of the machine list. So right now I don't know too much except I have faith that if we can get any image it can be manipulated to a reasonable quality. I also found another on-line, reasonable scanning company, and they tell me they can handle about any quality and will send me images on line and I can pick and choose what I want and have to pay for. And the cost to do all my selected images will be less than the dozen I did before. The question here is--do you scan from the glass or always use a negative holder? Have you tried from the glass. I know you talked about one of the photo programs to work on you rscanned images. How much can you enhance a darker or lighter scan? Quite a response for only seeing one scan but I am frustrated by all the negative talk (yup, pun intended) Mike

Susan, I just now saw this -- on page 4 of the forum, and it's nearly 1:30 a.m. so it's now Wednesday... I've never taken this scanner out of the box! So, I had to push all of the stuff off of the top of it (horizontal surfaces do NOT stay clean for more than about 10 minutes if I'm anywhere in proximity). The box has been on the floor under my desk for at least two years, but now that you mention it, it very well could be three (or four! - gads, I hope it hasn't been more than that, but I honestly wouldn't be surprised). Anyway, from what it says on the outside of the box (at least what I can see from this angle), it's a "Visioneer One Touch 9320 USB" Aha! The packing slip was still on the outside of the package (I ordered it online and it was delivered...) The ship date was 02/13/2004. My how time flies when you're having fun! Let's see... it has 400 x 3200 dpi optical resolution 48-bit Color (recognizes over 281 trillion colors); 5 Convenient OneTouch Buttons; Scans slides or a negative strip; Blazing fast Hi-Speed USB 2.0 Interface and cable (Compatible with USB 1.1 too!) Says it's Designed for Windows XP... The reason I chose this one is because it comes with the slide and negative adapter, and has other features that I wanted (at least at that time). My father was quite the photographer (always had a darkroom in the house); and I've got boxes and boxes of negatives and slides that I want to scan. When I bought this desk, I selected it specifically so I'd have a place to put the scanner. But, there isn't a clear horizontal space quite large enough for it right now. :-( Somewhere "out there" in the mess in the garage I have another scanner that I used to use (and it was very easy - you'll get the hang of it in no time at all), but that was with a different 'puter with Windows 98. When I went to Windows XP, I needed a new scanner, which is when I got the Visioneer... Guess this means I need to hold off on getting Vista, eh? ;-)