|
Fri, Dec 26, 08 at 14:48
| The remote and the keyless entry has quit working. The wall mount still works. I have replaced the batteries in both but it still does not work. I have tried to program both again but this does not work, the learn indicator light comes on when the learn button is pressed but the motor unit light does not turn on or blink(the light does work)when programming the keyless and remote. HELP...Any suggestions? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Dec 26, 08 at 16:17
| The logic board has a receiver that gets the signal from the remotes and the wireless keypad. The wall control is hard wired like a doorbell. I think your receiver has quit. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.