|
Mon, Nov 30, 09 at 20:40
| I have two garage doors w/ different gdo units. One is a model # 139.53660SRT1 that is using a Sears Trinary Radio Control, and the other unit is model # 139.53992D which uses a 139.53753 remote. Both remotes are working fine with their respective gdo however I cannot program them to work with the other gdo. Is this possible? What do I need to do. I have the manuals for both and read them, and tried all of the "programming" suggestions but nothing seems to work. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Dec 1, 09 at 9:57
| Your openers operate on different radio frequencies. The 53660 is 390 megacycles and the 53992 is 315 megacycles. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.