|
Wed, Oct 15, 08 at 17:46
| Good evening. I own a Sears Craftsman 1/2 HP garage door opener. I'm having a problem with the exterior wireless battery-operated keypad that operates it. Please tell me if you can help.
When I punch the 4-digit code into the keypad and hit Enter, the door will not open or close. The only action I get is the lighted keypad rapidly blinks for about 10 or 15 seconds. I checked the 9volt battery and it is good. The door still opens/closes fine with the car remote or interior control. I have tried resetting the unit with the red learn button on the rear of the unit but no luck. Thanks
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Oct 16, 08 at 16:39
| If it has worked in the past and has quit I think it has just gone bad. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.